If you want an advert placed here please
contact me, click on my name
The minimum requirement is your email address, you can also place
your phone number and address if you want to.
It is your resposibility to ask for your advert to be removed when
you find the parts you are after.
| Wanted:
Measurements for a cooling tank from
a 4hp Vertical R&V
|
Wanted:
Crank guard for 6hp Triumph Line R&V engine or
pattern to make one please. I need an original speed
control handle and perhaps the mechanism and bracket.
Jonathan
Biederer
|
Wanted:
I am still trying
to locate info on a magneto bracket for my 4 h.p. Can anyone please
help.
Rich Dahlen
|
| Wanted:
Looking for a 2HP type BL Carby Choke
plate. Craig Mathews
|
| Wanted:
Flyball governor, pushrod and ignitor trip for a BL
series 2hp engine. Larry Wrosch
|
| WANTED:
Ignitor for SR type R&V engine.
|
| Wanted:
For my 1 hp 'AL' I need the complete governor mechanism
-- the flywheel weight is missing on my engine. I could even use
pictures and measurements of an original. I am working on a small
metal casting outfit and could make a pattern if I had some measurements
to go by. Will
Simmons ...
|
Wanted:
I need a speed control lever for a
6 hp Triumph line, and I need a mixer for same and crank guard
also.
Jonathan
Biederer
|
| Wanted:
Ignitor for 2hp vertical R&V engine, I need the early horizontally
mounted ignitor
|
| Wanted:
Mixer, water pump and bracket for
6hp R&V vertical engine - contact: El Juenke
|
|
Wanted: Fuel
mixer for 6 HP Triumph Line. Doug Frels 641-740-0478,
|
| Wanted:
2HP type BL Crankguard wanted. - Craig
Mathews , 818-349-5167 evenings and weekends.
|
| Wanted:
Main bearings and piston for a 4hp R&V vertical engine - Kevin
Engel
|
| Wanted:
Clutch pulley to fit a 6hp R&V Triumph Line engine. Contact
|
| Wanted:
Governor parts for 4hp Triumph Line
hit and miss engine. Jim Stigerwalt 570-966-1249
|
| Wanted:
Looking for a head, rod end cap, and a crank guard for an "L"
series 6hp Triumph Line Engine -
|
| Wanted:
Muffler for a 2hp BL engine |
| |
