The oilers on R&V engines were
made by G.B. Essex Brass Co., Detroit, MI.
There is nothing special about these other than the make for originality
in restoring.
These measurements are from an R&V 'Triumph Line" engine,
believed to be original.
The glass measures about 1-5/8" round X 1-3/4" tall. It's
about 4-1/2" over
all tall. It has a 1/4" pipe thread. The fill hole has a 1/8"
thread plug. The drip setup is typical.
Look here: http://www.essexbrass.com/sfo2.htm
R&V
Triumph Line ignitors are made by the following people:
The original R&V part number
is #BL34 and covers all models of "L" Series Triumph Line
engines, and all the "R" series engines, with a modification
to the HR 16hp & JR 20hp engines.
RandyL
Rockwell
rockys_model_eng@earthlink.net
Our Website: http://home.earthlink.net/~randyarockwell
Mid-Valley Model Engineers of Oregon Association Member
Don
Miller
bjdeere1935@sbcglobal.ne
Low
tension ignition coils, battery boxes, crank guards, fuel tanks and
cooling tanks in stock!
John makes crank guards for the 2 &
4hp Triumph Line engines. Anyone who has a guard and lives near John,
can you take your guard to John to have a pattern made so others can
have guards made also. He also has the measurments for screen cooled
tanks as well.
John Wanat & Sons
P.O. Box 275
West Redding, CT 06896
203-938-3771
Kingpoleacaol.com
Full Line Supplier of antique engine products: Some
R&V Repro parts available.
Starbolt Engine Supplies
3403 Buckeystown Pk.
Adamstown, MD 21710
(301)874-2821 8:30AM to 4:30PM
(301)694-2821 5:00PM to 9:00PM
starbolt4@aol.com
See Our Web Page: http://www.enginads.com/starbolt/
Any communication to
owners of R&V engines can be made through Site Custodian.
Official R&V Web Site © 2000 - 2023
